En - 8
operatIng InStructIonS
• Make sure the “ON/OFF” switch is in the “OFF” position.
The power switch has international symbols for ‘on’ and
‘off’: On ( | ) (Fig. 11) Off (O) (Fig. 12).
• Unwind the power cord completely and plug the GFCI
into a grounded 120 volt outlet. Press the ‘reset’ button
on the GFCI box (Fig. 13). The indicator window should
show a red color. This must be done each time the unit is
plugged in.
• Install the garden hose adapter (GHA) and quick connect
lter. First, remove the plastic shipping cover on the
water inlet on the front of the power washer. Attach the
clear plastic adapter by screwing it into the water inlet
(Fig. 14).
• Connect garden hose. Hand tight is ne. Next screw on
the blue/grey/orange collar attachment to your garden
hose (Fig. 15). Slide the blue/black collar onto the
clear adapter, it will “click” into place. The water is now
connected to your power washer.
• Turn on the water supply at the faucet.
• Release the safety lock button on the spray gun by
pressing the safety lock button from right to left. While
pointing the spray gun in a safe direction, squeeze the
trigger on the spray gun until there is a steady stream of
water, letting the water and air out of the hose. (Fig. 16)
• Turn the ‘ON’ knob. The motor and pump should now
ready to run and provide a powerful spray.
• Pull trigger on spray gun to activate the total stop
system turning the machine on by pulling the trigger and
machine will turn off when releasing the trigger.
Detergent Suction
• Place detergent suction hose into desired power washer
detergent. Turn nozzle to appropriate function (Fig. 17).
NOTE: Use of a high pressure hose longer than the
one originally supplied with the cleaner, or the use of an
additional hose extension, may reduce or completely
halt the intake of detergent. Fill the tank with highly
biodegradable detergent.
operatIng tIpS and maIntenance
How to Avoid Damaging Surfaces
• Damage to surfaces being cleaned occurs because the
impact force of the water pressure exceeds the durability
of the surface. Bare wood can be penetrated; paint can
be peeled off, etc. You can vary the force of your power
washer by controlling following these basic rules:
Switch ON
Fig. 11
Reset
Fig. 12
Fig. 13
Switch OFF
Fig. 16
Fig. 17
Garden
Hose
Adapter
Pump
Hose
QC-Clear
Adapter
Fig. 14
Fig. 15
(24 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels