Blue Clean AR383 Instructions d'exploitation télécharger pdf (Page 5)

Operating Instructions and Parts List AR383

5

www.arnorthamerica.com

SerVicinG of a doUble-

inSUlated aPPliance

In a double-insulated product,

two systems of insulation are

provided instead of grounding. No

grounding means are provided for

a double-insulated product, nor

should grounding means be added

to the product.

Servicing a double-insulated

product requires extreme care and

knowledge of the system, and

should be done only by qualiﬁed

service personnel.

Replacement parts for a double-

insulated product must be identical

to the original parts. A double-

insulated product is marked with

the words “Double Insulation” or

Double Insulated”. Product may

also be marked with symbol shown

below.

Do not use

pressure that

exceeds the operating pressure

of any of the parts (hoses,

ﬁttings, etc.) in the pressurized

system. Ensure all equipment and

accessories are rated to withstand

the maximum working pressure of

the unit.

Do not spray electrical apparatus

and wiring.

• Never disconnect the high

pressure discharge hose from

the machine while the system

is pressurized. To depressurize

machine, turn power and water

supply off, then press gun

trigger 2 - 3 times.

• Never permanently engage the

trigger mechanism on the gun.

• Never operate the machine

without all components

properly connected to the

machine (handle, gun/wand

assembly, nozzle, etc.).

Equipment

damage.

• ALWAYS turn water supply

“ON” before turning pressure

washer “ON”. Running pump

dry causes serious damage.

• Do not operate the pressure

washer with the inlet water

screen removed. Keep screen

clear of debris and sediment.

• NEVER operate pressure washer

with broken or missing parts.

Check equipment regularly

and repair or replace worn or

damaged parts immediately.

• Use only the nozzle supplied

with this machine.

• Never leave the wand

unattended while the machine

is running.

• Never attempt to alter factory

settings. Altering factory

settings could damage the unit

and will void the warranty.

• Always hold gun and wand

ﬁrmly when starting and

operating the machine.

• NEVER allow the unit to run

with the trigger release (off)

for more than one (1) minute.

Resulting heat buildup will

damage pump.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Commentaires sur ces manuels

Pas de commentaire